There are a few pitfalls that enshroud installation of a vinyl privacy fence. It does not matter whether you hire a company to install the fence for you or whether you do it yourself; these pitfalls are present in every situation. Knowing what they are and how to avoid them is paramount to successful vinyl privacy fence Scranton installation. Apart from being able to identify and avoid these pitfalls, you will also learn the tricks and techniques used by pros to successfully install a beautiful fence that meets required needs, while still maintaining an elegant front. These are techniques that will save you time, money and headaches by making sure that the DIY project goes on without a hitch the first time or the installation company earns their keep.
First off, make sure that the privacy fence actually makes good on privacy. This is a common pitfall. People fail to calculate the distance necessary between posts to ensure privacy. Few posts may save you some digging, and a bit of money, but in the end, you have to contend with wind, nosy neighbors and gravity. Make sure that you space posts along the fence well to actually build a vinyl privacy fence. Having more posts is good for you. The more posts you have, the stronger the fence. Do not listen to the installation guy who tells you that you stand to save a bunch by spacing out posts along the fence. As a rule of the thumb, keep space posts under 8 feet along the privacy fence.
Together with the posts, have at least three horizontal 2 by 4s or even 2 by 6s offering support to the weight of each panel on the fence. Scrimping on the fence’s horizontal materials gives you a fence with saggy panels, even if post spacing is less than 8 feet.
Before you start working on a vinyl privacy fence Scranton project, make sure you have a permit from the local authorities. This is perhaps the first thing you should do. You do not want a situation where, in the middle of your build a squad car pulls up and orders you to stop with the hammering and sawing. To avoid half-finished vinyl privacy fence, get a permit from the local authorities.
If you are using a company to install your vinyl privacy fence Scranton, most likely it has taken out a permit on your behalf, so you do not have to worry. This is not the only reason you should get a permit before building a fence. If you build it on the wrong place, people from city hall will match down to your fence, tear it down and walk away. All the effort and hard work you put behind your beautiful vinyl privacy fence Scranton will go down the drain.